CLOSE

+86-20-87046681/+86-87046683

Common Specifications and Types of Hinge


Hinges are also called hinges (market hinges and hinges each refer to different types of goods). It is composed of a pair of metal or non-metal blades connected by a shaft pin. Often two-fold. It is a device through which two parts of a door, cover, or other need a swing switch are connected and rotated relative to each other.


Ⅰ. Specifications of standard hinges


There are many types of hinge specifications. We generally have 50.8*30*1, 100*60*1, 63*35*1, 101.6*76.2*2, 88.9*88.9*3, and other specifications for commonly used doors and windows.


Ⅱ. Types of common hinges


1. Ordinary hinge


They are mainly used indoors and windows—ordinary hinge specifications: used for cabinet doors, windows, doors, etc. The materials are iron, copper, and stainless steel. The disadvantage of common hinges is that they do not have the function of spring hinges. After the hinges are installed, various bumpers must be installed. Otherwise, the wind will blow the door panels.


2. Pipe hinge


They are mainly used to connect furniture door panels, also called spring hinges. The pipe hinge specification page is also called a spring hinge. Used primarily for the connection of furniture door panels, it generally requires a panel thickness of 16-20 mm. The materials are galvanized iron and zinc alloy. The spring hinge is equipped with adjusting screws, which can adjust the height and thickness of the board up and down, left and right. One of its features is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc., have corresponding hinges to match, so that various cabinet doors have related extensions.


3. Door hinge


It is divided into ordinary type and bearing type, and the bearing type is divided into copper and stainless steel. The door hinge specifications: It is divided into ordinary type and bearing type. The normal type has been mentioned before. Bearing types can be divided into copper and stainless steel in terms of material. Judging from the current consumption situation, many copper-bearing hinges are used because they are beautiful, bright, affordable, and equipped with screws.


4. Flip door hinges and other hinge specifications include glass hinges, tabletop hinges, and flip door hinges


Glass hinges are used to install frameless glass cabinet doors, and the glass thickness is required to be no more than 5-6 mm.


Hinge specifications are also known as hinges, and the official name is the hinge. It is often composed of a two-fold type, which is a part that connects two parts of an object and can make it move. The hinges are distributed on the doors and windows at home; without them, they cannot move freely.


A hinge is a mechanism used to connect two entities and rotate relative to each other. The hinge can be made of a movable part of foldable material. According to the hinge type, ordinary hinges can be divided into the one way hinge, the two way hinge, the short arm hinge, and the rebound hinge. The kind of cup diameter can be divided into 26 cups, 35 cups, etc. According to the type of material, it can be divided into iron and cold-rolled steel. According to the kind of arm, hinges can be divided into sliding type and clamp type.


Related News


News Products Development History
2019.01

2019.01

2018.12

2018.12

2018.05

2018.05

2018.01

2018.01

2017.01

2017.01

2016.1

2016.1

2011.06

2011.06

2006.12

2006.12

2006.07

2006.07

2006.01

2006.01

1992.08

1992.08

1990.08

1990.08

What's New at Roeasy?