How to adjust door hinges so door closes?

To adjust door hinges so that the door closes properly, you can follow these steps:

Determine the problem: Identity which part of the door is causing the issue. Is the door sticking, rubbing against the frame, or not closing all the way?

Tighten loose screws: Check the screws holding the hinges in place to see if they are loose. If they are, tighten them with a screwdriver.

Adjust the hinges: Loosen the screws on the hinge that are causing the problem. Move the hinge slightly in the direction needed to align the door properly. Tighten the screws back in place.

Test the door: Check to see if the door closes properly. If not, repeat the process by adjusting the hinge further until the door closes correctly.

Repeat if necessary: If the door still does not close properly after adjusting one hinge, check the other hinges to see if they need to be adjusted as well.

Lubricate the hinges: Once the door is closing properly, apply lubricant to the hinges to keep them moving smoothly.

By following these steps, you should be able to adjust your door hinges so that your door closes properly.

Related Products

CH-135-61 135 Degree Slide-on Hinge

BS-4008 Ball Bearing Drawer Slide

LOCK 1 Soft Close Ball Bearing Drawer Slide

DH-4325W Plat Hinge